Motorized Valve2016
Product Description
M-V2016 Series Motorized Valves are made up of Actuator and Valve Body. The Valve is closed, configurations of valve body are closed off; The thermostat (NTC) transfers a signal to actuator that will connect to power, and then open valve, input hot water or freezed water to fan coil unit; If the room temperature reaches to set-point, thermostat transfers a signal to actuator to cut off the power, and spring switch returns, valve is closed, and the hot or freezed water is block to fan coil unit. Therefore, the room temperature could be controlled in the set-point through valve opened or closed.
Production characteristic:
Material
Actuator: Stainless steel plate, Aluminum cover
Valve Body: Forged Brass
Tem: Brass/Stainless steel
Seat: Brass
Paddle: Nitrile-butadiene rubber(NBR)
Technical Parameter:
M-V2016 Series Motorized Valves are smart, everlasting, less noise and able to work under high temperature environment.
Data
Model: V20162W1220 Config.: Normally closed two-way
M-V20162W1232 diverting three-way
M-V20163W1243 normally closed two-way
M-V20162W3420 normally closed two-way
M-V20162W3432 normally closed two-way
M-V20163W3446 diverting three-way
M-V20162W1168 normally closed two-way
M-V20163W1157 diverting three-way
Connection type: G1/2 Kv: 2.0 Differential pressure(MPa): 0.20
G1/2 3.2 0.15
G1/2 4.3 0.15
G3/4 2.0 0.20
G3/4 3.2 0.15
G3/4 4.6 0.15
G1 6.8 0.10
G1 5.7 0.10
Medium; Hot water Liquid temperature: 2~95 degree Celsius
Pressure: (MPa): 2.5
Ambient temperature: <40 degree Celsius
Power Supply: 220V(± 10%); 50-60Hz
Storage temperature: -40~+70 degree Celsius