Fan Coil Valve (M-V1109)

Product Description

M-V1109 Series Motorized Valves are made up of Actuator and Valve Body. The Valve is closed, configurations of valve body are closed off; The thermostat (NTC) transfers a signal to actuator that will connect to power, and then open valve, input hot water or freezed water to fan coil unit; If the room temperature reaches to set-point, thermostat transfers a signal to actuator to cut off the power, and spring switch returns, valve is closed, and the hot or freezed water is block to fan coil unit. Therefore, the room temperature could be controlled in the set-point through valve opened or closed.

Production characteristic:
Material
Actuator: Stainless steel plate, Aluminum cover
Valve Body: Forged Brass
Tem: Brass/Stainless steel
Seat: Brass
Paddle: Nitrile-butadiene rubber(NBR)
Technical Parameter:
M-V1109 Series Motorized Valves are smart, everlasting, less noise and able to work under high temperature environment.

1)Material of Valve Body: Casting brass
2)Material of Valve Pole: Brass
3)Seal Material: Nitrile Rubber (NBR)
4)Driver Chassis: Stainless Steel
5)Driver Cover: Duralumin
6)Driver can be installed after the installation of the valve
7)Locate installation easy wiring
8)Security and durability, low noise when working
9)Work security at high temperature or high humidity environment

Medium; Hot water Liquid temperature: 2~95 degree Celsius
Pressure: (MPa): 2.5
Ambient temperature: <40 degree Celsius
Power Supply: 220V(± 10%); 50-60Hz
Storage temperature: -40~+70 degree Celsius