LCD pressure transmitter

KF-200

Product Introduction

KF series wind differential pressure transmitter uses the imported

differential pressure sensor for sensitive core. Its shell is plastic shell, and its

internal part use the specific integrated circuit to transform the sensor voltage

signal into a standard current signal. It can be directly connected with the

computer interface card, display record instrument or DCS to form a wind

differential pressure measurement system. The two pressure interfaces are a

hangnail cock structure, which can be connected with inner diameter Ø6 to Ø8

plastic hoses, and then connect to measured pressure. The KF type has

the standard current or voltage output for choice. It is easy to install and widely

used in many industries, such as boiler air supply, underground ventilation,

electricity, coal industry, as well as air conditioning and medical industry.

Product Introduction

KF series wind differential pressure transmitter uses the imported

differential pressure sensor for sensitive core. Its shell is plastic shell, and its

internal part use the specific integrated circuit to transform the sensor voltage

signal into a standard current signal. It can be directly connected with the

computer interface card, display record instrument or DCS to form a wind

differential pressure measurement system. The two pressure interfaces are a

hangnail cock structure, which can be connected with inner diameter Ø6 to Ø8

plastic hoses, and then connect to measured pressure. The KF type has

the standard current or voltage output for choice. It is easy to install and widely

used in many industries, such as boiler air supply, underground ventilation,

electricity, coal industry, as well as air conditioning and medical industry.

Feature

1. sensitivity and temperature compensation

2. strong anti-jamming and long-term stability

3. diversification shapes and easy to install

4. warranty period: 12 months

Technical Parameters

1. power supply: 12VDC to 36VDC (standard 24VDC);

2. output signal : 4-20mA, two-wire

3. range: 0 to 200 Pa ... 1000kPa;

4. compensate temperature: 0 ~ 60 ° C;

5. medium temperature: -10 to 85 ° C;

6. Environmental temperature: -20 to 70 ° C;

7. work mode: differential pressure;

8. accuracy: 0.5;

9. zero temperature drift: ± 0.03FS / ° C;

10. sensitivity temperature drift: ± 0.03FS / ° C;

11. overload pressure: 300% FS.

12. static pressure: 700kPa

Electrical Connection

red wire-power supply +,green wire-power supply –

Wiring Figure2

Model  KS200

wind differential pressure transmitter

Range: 0-200Pa~1000kPa

KF-200